1 – Make sure the surface is clean and dry. Clean gently with isopropyl rubbing alcohol and allow to dry. (Do not use household cleaners.)
2 – Remove the protective layer from the adhesive strips.
3 – Carefully position the frame and press firmly against the wall for ~30 seconds.
That's it!
No nails, no holes, no guess work!
For hard to stick surfaces or for added safety, secure QIK FRAME backing with the T-Pin just below the hinge line.
1 – Detach your QIK FRAME from the QIK FRAME backing. (See Rotate for details and video.)
2 – Push the T-pin through the backing just below the hinge line and nail into sheetrock wall at 45° angle, downward until it is flat against the backing. The "T" part of the pin should lay horizontal just below the hinge line.