Installation & Use - Videos


1 – Clean with isopropyl rubbing alcohol and allow to dry. 

2 – Remove the protective layer from the adhesive strips. 

3 – Carefully position the frame and press firmly against the wall for 30 seconds.



IN – Lift the frame. Place print against the inside of the glass.  Rest the print on the inside bottom edge of the frame as you lower the frame.

OUT – Slowly lift the frame. Print will fall back. Grasp the edge of the print and remove from the side.  


Detach – Lift the frame and press down on the Backing flap to separate the Velcro®. Lift to remove frame from the wall.  NEVER PULL ON THE FRAME!

Attach – Position the frame against the wall over the frame. Align the Velcro® and lower the frame.